P  R  O  F  E  S  S  I  O  N  A  L     G  R  A  D  E

OPTIMIZING CIRCULATOR

 GREEN BUILDER'S  HOT WATER CIRCULATOR

 

Enjoy whole house instant hot water comfort at

YOUR chosen REDYness  and   YOUR chosen TEMPerature

 

• 2x more CONVENIENCE  when using timer and scheduled-off use single-cycle push-button on-demand override

• Record EFFICIENCY optimizing controller,  cyclic pump operations, anti-siphon solenoid prevents costly HW demand, more

• Superior COMFORT & CONTROL  activation customization, owner optimized H & C readiness

• Homeowner Preferred USER-FRIENDLY tool less adjust. comfort temperature setpoint, calcium-proof

• Professional grade MAINTENANCE-FREE calcium-proof, no required periodic maintenance

• Easiest INSTALLATION 3 step / 4 hose connection install, no cutting, no mounting, no sweat (soldering) pipes

• On-demand IDEAL for dishwashers that require hot water for proper operation / cleaning

RedyTemp® strict "Efficiency and Comfort" based Engineering results in Maximum Comfort,

 Minimal Energy Demand and Unsurpassed Water Savings.

 

      RedyTemp® is the clear and obvious choice when comfort and long-term efficiency matter.

 

Unique design solves number of inefficiencies and discomfort in today's circulators by eliminating...

• Discomfort caused by HW water Siphoning into Cold Water side when trying to get cold water

• Recurring costly demand on water heater from HW Siphoning when ANY cold water is used (toilet flush, sprinklers, etc)

• Temperature complaints (owners have accurate control of their comfort temp setpoint)

• Energy waste of continuous pumping systems; RedyTemp® uses Temp based "as needed" cyclic-pumping

• Inconveniences of "timer only" systems; RedyTemp® provides Timer and On-demand push-button override 

• Frustrations of having to locate a tool, flashlight, ref material, etc. to make a simple temperature adjustment

• Excessive flow rates that can damage pipes and cause leaks over time

• Annoying sounds (similar to Ice in a blender) experienced by C.Pepper owners

• Non-Performance with low flow circulators in winter or when pipes buried in foundation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ALL SYSTEMS SHIP COMPLETE  NO ADDITIONAL PARTS NEEDED TO INSTALL

(via UPS Ground / Tracking Info sent to your email)

 

2010 PRODUCT BROCHURE

Includes specifications

 

We can pass savings to you instead of paying Credit Card Charges, it's your choice

OR SAVE  WITH "PAY-BY-CHECK" FAX or eMAIL ORDER FORM

for non-discounted Credit Card orders use below links to order

 

Hot Water Circulator for Tank water heaters AND Tankless systems (connected to a tank) 

                                        

    ATC-3000  $370.00 with or w/o Dedicated return line Max distance to water heater 125 ft

                                            1/2" male connections, Built-in check valve and anti-siphon solenoid, Power cord, 2 Flex lines, 20 event Timer,

                                             Install / Users Guide, 2 yr warranty

 

TL- Series Circulators for Tank and Tankless water heaters

                                                                                                                        

                                              Up to 2 story home and distance to water heater < 125'

   TL4000D  $435.00 Dedicated return line (Adj Flow 1 to 14 GPM,16 ft head, 1/25hp) TACO 008 Stainless Steel Pump,

                                            Optimizer Control Box,  Built-in check valve, two (2) isolation valves 1/2" female connections, Temperature probe

                                            1/2" male pipe threads, Power cord, 20 event Timer w/built-in recharge battery, Install / Users Guide, 2 yr warranty

   TL4000N  $489.00 No Dedicated return line / Cold line as return (Adj Flow 1 to 14 GPM,16 ft head, 1/25hp) TACO 008

                                            Optimizer Control Box, Built-in check valve, two (2) isolation valves, 1/2" male connections, Temperature probe,

                                            Anti-siphon solenoid, 2 isolation valves, Power cord, two (2) Flex lines, 20 event Timer, Install / Users Guide, 2 yr warranty

 

                                              Up to 3 story home and distance to water heater > 125' and < 300'

   TL5000D  $585.00 Dedicated return line (Adj Flow 2 to 30 GPM, 31 ft head, 1/8hp) TACO 011 Stainless Steel Pump

                                            Optimizer Control Box,  Built-in check valve, two (2) isolation valves 1/2" female connections, Temperature probe

                                            1/2" male pipe threads, Power cord, 20 event Timer w/built-in recharge battery, Install / Users Guide, 2 yr warranty

   TL5000N  $639.00 No Dedicated return line / Cold line as return (Adj Flow 2 to 30 GPM, 31 ft head, 1/8hp) TACO 011     

                                            Optimizer Control Box, Built-in check valve, two (2) isolation valves, 1/2" male connections, Temperature probe,

                                            Anti-siphon solenoid, 2 isolation valves, Power cord, two (2) Flex lines, 20 event Timer, Install / Users Guide, 2 yr warranty

                                                                                                                          

                                                                          

                                    

After a years use...RedyTemp owners said...

                                                                                      

ATTENTION:  Trade Professionals tired of customer callbacks, like;

"Now I don't have cold water" or "It's barely warm" and "I'm getting scolding flashes of hot water when showering"

 

RedyTemp® owners naturally optimize performance to their "just right" temperatures

 

With a RedyTemp Hot Water Circulator you;

 

·         choose the hot water temperature that instantly comes out the tap

·         control temperature setpoints for both hot and cold lines

·         control down to the minute when the hot water circulator operates

·         control type of Readiness controller (Timer, Push-button On-demand, Timer and Push-button, Wireless, etc.)

·         avoid installing a system which leaves crossover valves / comfort valves open when system is off

·         avoid installing a system which continues to run even after hot water is at desired temp

·         avoid frustrating temperature swings caused by systems with >5 deg temperature start / stop pump activations

·         avoid installing a system which siphons HW line water into the CW line when trying to get/use cold water

·         avoid calcium / mineral buildup problems thanks to DuPont Calcium Proof components

·         avoid periodic cleaning requirements and/or water softener requirements

·         avoid systems which vibrate walls or require mounting.  RedyTemp is whisper quiet due to rubber feet/cushions

·         avoid costly hot water convection circulating all day and all night (thermostatic normally-open valve systems)

 

 

"I have a standard tank water heater, which system is best for my project?"

 

                           

ATC-3000    Works on ALL tank systems with OR without (will use cold line as return) dedicated return AND faucet is less than 125' from water heater and on

                                               1st or 2nd floor

    

 

"I foresee a push-button on-demand hot water lifestyle instead of using a timer which system is best for my home?"

 

                           

TL-4000(N or D)  N=No return line exist (will use cold line as return) or D = Dedicated return line exist. 

The higher horsepower of the TL4000 makes it the better choice for an on-demand push-button as needed lifestyle when faucet is less than 125' from water heater and on 1st or 2nd floor

"I have a tankless water heater, which system is best for my project?"

 

TL-4000(N or D)  N=No return line exist (will use cold line as return) or D = Dedicated return line exist

                        Works on ALL tank systems with OR without (will use cold line as return) dedicated return AND faucet is less than 125' from water heater and on

                                               1st or 2nd floor and;  Farthest faucet is on 1st or 2nd floor and;

 

TL-5000(N or D)  use when structure exceeds TL-4000

 How Thermostatic By-Pass Valve hot water circulators sacrifice comfort, efficiency and convenience.

 

Don't get stuck paying month after month for "costly" Inefficiencies  in other systems?

 

ALL SYSTEMS SHIP FULLY ASSEMBLED READY TO INSTALL

                                                        SHIPS SAME DAY  when order by 3pm PST  M - F

INCLUDES

• RedyTemp® Optimizer 

• Digital Timer (20 Events Per Day) built-in battery backup

• Two 1/2" x 30" x 1/2" Flex Lines

• 9' ft White Detachable Power Cord

• Install Guide / Manual / Registration Card

• 2 Year Warranty / 30 Day Money Back Guarantee

RedyTemp® delivers the very best in hot water comfort, convenience and savings by eliminating numerous costly, comfort robbing  inefficiencies found in today's circulators, recirculators and on-demand systems. Specifically, the inability of the homeowner to control both hot and cold water comfort, the inefficiency of continuous running pumps, the inaccuracies from pipe clamp-on temperature sensors and the costly waste of energy realized from repeated siphoning water from the hot water line when homeowners want cold water.   Our philosophy, the sooner hot water is received at your desired temperature, the sooner very cold city water stops filling your water heater--water that would go down the drain, wasted.  RedyTemp®'s temperature dial provides homeowners the means to control and optimize their home’s hot water convenience and comfort for maximum efficiency and savings.  

 

RedyTemp® monitors temperature using a "precision grade" stainless steel "water contacting" temperature probe. It consistently and accurately measures temperature, cycling the internal TACO pump, only as needed, maintaining water at the homeowners dialed-in temperature.  RedyTemp®'s unique space-industry engineered manifold achieves ‘positive bypass flow restriction’ using an integrated ‘normally closed’ solenoid valve for industry-record efficiency and savings.  This more efficient bypass valve prevents any water from siphoning out of the hot water line and into the cold water line during the homeowner’s use of cold water inside or outside of the home.  Inefficient ‘normally open’ thermostatic bypass/comfort valves remain open any time 95F or hotter water is not present in the line resulting in repeated, unnecessary and expensive demand on the water heater. This costly, inefficient siphoning occurs as a result of the imbalance in water pressures between the hot and cold water lines during cold water use. Higher pressure in the hot water line forces water into the cold line, even during the use of cold water only. This siphoned water is then replaced by cold city water entering the home’s water heater. With Inefficient hot water circulators, every instance of cold water use, whether at the kitchen tap, the bathroom toilet, or the garden hose, results in extra demand on the water heater.

 

RedyTemp®’s temperature-based cyclic system pumps water that is lower than the homeowner’s selected temperature out of the hot water line, into the cold water line, and then back into the water heater.  This cyclic-pumping consumes less energy compared to top-mounted hot water circulators which pump continuously during scheduled-on periods.  Cyclic pumping benefits comfort as well by providing a home’s cold water pipes the seconds needed to absorb the warmer water that has been passed from the hot water line.  As a result, the homeowner does not waste water, time and energy waiting for cold water, a frequent complaint by owners of other hot water circulators.   RedyTemp®'s normally closed solenoid valve provides unsurpassed comfort in that it's not vulnerable to pressure fluctuations during cold water use, unlike inferior thermostatic valve and spring-based check valve designs that cannot prevent siphoning from the hot water line during cold water usage.  

 

Installing a RedyTemp® guarantees the most efficient control of your home’s hot water performance.  No other product on the market provides better comfort, more control, or improved efficiency.  With energy-saving features including "temperature based" cyclic pumping, adjustable temperature control, and scheduled-off "single-cycle" override to name a few, it's easy to see why RedyTemp® is the industry’s "homeowner preferred" hot water circulator.

 

Also ideal for:

• Water efficient dishwashers which need "hot" water fill-ups to clean efficiently

• Property owners / managers seeking energy efficient protection against frozen water pipes

• Food service establishments; satisfy hot water readiness and hygiene requirements

• Reduce septic system maintenance and sewer costs

ALL SYSTEMS SHIP COMPLETE  NO ADDITIONAL PARTS NEEDED TO INSTALL

(via UPS Ground / Tracking Info sent to your email)